This device, when plugged into the "Keypad" jack, appears to the telescope as the Meade hand controller. This allows the telescope to complete its start-up process and ready itself for receiving commands over the RS-232 port. Note that this "Boot-Up" emulator has no buttons and cannot control any telescope functions by itself.>For 8", 10", and 12" LX200 "Classic" telescopes, and LXD650/750 mounts with version 3.xx software. $26.00*
Questions? Just email us: firstname.lastname@example.org
Allows computer control of the telescope through its RS-232 port, without the Meade hand controller.
Use all of the telescope's RS-232 command language features, with a laptop and a suitable third-party software package.
Includes short cable. You can also use the original handset cable.
For Meade LX200 version 3.xx software.
Priced at only
* Shipping and any applicable sales tax will be added to your order.
When the LX200 Classic with version 3.xx software starts up, it expects a "handshake" with its hand controller. Without that conversation, the telescope will not complete its start up, and thus cannot be used even by sending commands through the RS-232 port. This device plugs into the Keypad port in place of the hand controller, and completes the start-up handshake so the telescope can respond to control through the RS-232 port.
The emulator is small and stays out of the way while in place. It will blink a red LED three times after power on, when the start-up handshake has completed successfully.
Please refer to this PDF document for usage instructions: Usage Instructions
If you'd like to order, or have questions, please contact us at email@example.com.
We ship internationally.